Artesyn MaxCore MC1600, Installation And Use Manual, Page: 102 / 118

100 MC1600 Extreme Edge Server Installation and Use (6806870A02A)
Software Configuration
Software Configuration
5.2.2.1.1 Artesyn IPMI OEM Command Summary
These OEM commands are specific for the Extreme Edge Server. OEM commands for other
similar platforms may vary.
5.2.2.1.2 Power Management
In addition to the standard IPMI Chassis Control command, the following OEM commands are
created for a fine power control over the chassis.
Table 5-3 General OEM Command Structure
Request Data
1 0xae
2 Version of the command
( n ) Request payload data if any, n bytes
Response Data
1 0xae
2 Completion code
( m ) Response payload data if any, m bytes
Table 5-4 Artesyn IPMI OEM Command Summary
Command NetFn Command Privilege Level Table
Set FRU Instance Power State OEM/Group 0x34 Administrator 5-5
Get FRU Instance Power State OEM/Group 0x35 User 5-6
Set Chassis Power Policy OEM/Group 0x36 Operator 5-7
Get Chassis Power Policy OEM/Group 0x37 User 5-8
Set Aggregated Temperature Sensor OEM/Group 0x3C Administrator 5-9
Get Aggregated Temperature Sensor OEM/Group 0x3D User 5-10
Get FRU Present State Version 0 OEM/Group 0x47 User 5-11
Get FRU Present State Version 1 OEM/Group 0x47 User 5-12
Set Chassis Address Info OEM/Group 0x48 Administrator 5-13
Get Chassis Address Info OEM/Group 0x49 User 5-14