Artesyn 6806800U73A, Installation And User

Page: 31 / 54

Hardware Preparation and Installation
PCIE-6001 Installation and Use (6806800U73A)
31

Install the device at once after you take it out of the anti-static package. If you need to lay
down the device, place it back in the anti-static package. Do not lay the device on the shelf
or cabinet.

Monitor the temperature and humidity of the equipment room. Warm air decreases the
humidity but increases the static electricity in the room.
2.5 M.2 AHCI or NVME SSD Installation and Removal
This section provides procedures on how to install or remove M.2 AHCI or NVME SSDs from a
PCIE-6001 card.
2.5.1 M.2 AHCI or NVME SSD module installation on the PCIE-6001
card
PCIE-6001 provides four (4) sets of the hardware as shown in Figure 1-1 .
Damage of Circuits
Electrostatic discharge and incorrect module installation and removal can damage
circuits or shorten their life. Before touching the module or electronic components,
make sure that you are working in an ESD safe environment.