Artesyn Embedded Technology 6806800T07B, Installation And Use Manual, Page: 26 / 34

SharpMedia™ 2U Platform Installation and Use (6806800T07B)
Safety Notes
26
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense. Changes or
modifications not expressly approved by Artesyn Embedded Technologies Embedded
Communications Computing could void the user's authority to operate the equipment. Board
products are tested in a representative system to show compliance with the above mentioned
requirements. A proper installation in a compliant system will maintain the required
performance. Use only shielded cables when connecting peripherals to assure that appropriate
radio frequency emissions compliance is maintained.
Operation
Product Damage
Surface of the Product
High humidity and condensation on the product surface causes short circuits.
Do not operate the product outside the specified environmental limits. Make sure the product
is completely dry and there is no moisture on any surface before applying power.
Overheating and Product Damage
Operating the product without forced air cooling may lead to overheating and thus damage of
the product.
When operating the product, make sure that forced air cooling is available in the enclosure.
Data Corruption
If power to the unit is removed while a firmware update is in progress to the flash memory, the
changes will not be saved, and worse, the flash memory may be corrupted. In such case the is
likely to remain in non-operable state and will require reconditioning by qualified repair
services.