Unboxing Your Piano.
Cylindrical Nuts (A) x 4
Foot Bolts (B) x 4
Piano Body Bolts (C) x 2
Back Panel Bolts (D) x 2
Pedal Board Bolts (F) x 4
Back Panel Screws (E) x 4
Plastic Caps (G) x 4
A
B
A
Back Panel Bracket
Back Panel Bracket
B
Screwdriver
Piano Body
Back Panel
Pedal Board
Legs (2)
Feet (2)
NOT Pictured:
USB Cable
Audio Connection Cable
Power Adapter
Place the four Cylindrical Nuts (A) into the holes in the
Stand Legs, with the screwdriver slot facing out. Use a
screwdriver to align the threads in the nuts with the
openings on the bottom of the Stand Legs.
Place the dowells in the feet into the appropiate holes in
the bottom of the Stand Legs. Make sure that the feet are
facing away from the back panel bracket as shown
below. Thread two Foot Bolts (B) through the foot and
into the cylindrical washers, rotating the washer to align if
needed. Firmly tighten & repeat for the other side.
1. Assembling the Stand Legs.
What’s Included
