Page 15
Fiberlink® 5200 Series User’s Manual
Fiberlink® 5200 Series
Data Configuration Settings (Card Version)
1 2
1 2
1 2
1 2
Channel #
Balanced
Unbalanced
Channel 1
(
controlled by Switch 1)
Channel 2
(
controlled by Switch 2)
Audio Output Switch Settings For Card Version
The Fiberlink 5200 Series card units have three switch blocks; one 10 position, one 4 posi-
tion, and one 2 position. The first block, “Data Config”, represents the Ethernet and RS
Channel configurations.
Data Mode
Baud Rate
2 Wire/4 Wire Mode
Input Termination (Down = Unterminated; Up =120 ohm)
Output Termination (Down = Unterminated; Up =120 ohm)
Ethernet
Data Configuration For Card Version
1 2 3 4 5 6 7 8 9 10
DATA CONFIG