Artel DigiLink DLC170, Installation And Operations

Page: 19 / 50

DLC170 Function Modules Installation and Operations Manual 9
Understanding and Using the DLC170AD
Figure 3. DLC170AD Configuration Switch SW1
Table 2 describes the DIP switch SW1 configuration options. The factory-set configuration settings are shown
in bold type.
Table 2. DIP Switch SW1 Settings
Function Selected Operation
Position
S1 S2 S3 S4 S5 S6 S7 S8
Pedestal ON Enabled
ON
Disabled OFF
Video AGC Enabled
ON
Disabled OFF
Reserved Must be ON
ON
Reserved Must be ON ON
Reserved Must be ON
ON
Standby Signal SDI Grey screen ON
Non-video keepalive OFF
SDI grey field
standby signal 525 lines (NTCSC) ON
625 lines (PAL) OFF
Alarm on Loss of
Video Disabled ON
Enabled OFF
Configuring Audio Characteristics with DIP Switch SW2
Switch SW2 enables audio embedding and controls the various audio characteristics of the DLC170AD, such
as the destination group and audio resolution. This switch also enables the EMS override and SFP alarm
functions.