Page 6
FiberLink 1900 Series User’s Manual
FiberLink 1900 Series
Technical Specifications
Number
Part Number
Description
of Fibers
XA-1900-1
Transmitter, 850 nm, Multimode, Box, ST
1
XA-1900-C1S
Transmitter, 850 nm, Multimode, Card, ST
1
XA-1900-3
Transmitter, 1310 nm, Multimode, Box, ST
1
XA-1900-C3S
Transmitter, 1310 nm, Multimode, Card, ST
1
XA-1900-7
Transmitter, 1310 nm, Single Mode, Box, FCPC
1
XA-1900-7-ST
Transmitter, 1310 nm, Single Mode, Box, ST
1
XA-1900-C7S
Transmitter, 1310 nm, Single Mode, Card, ST
1
RA-1900-1
Receiver, 850 nm, Multimode, Box, ST
1
RA-1900-C1S
Receiver, 850 nm, Multimode, Card, ST
1
RA-1900-3
Receiver, 1310 nm, Multimode, Box, ST
1
RA-1900-C3S
Receiver, 1310 nm, Multimode, Card, ST
1
RA-1900-7
Receiver, 1310 nm, Single Mode, Box, FCPC
1
RA-1900-7-ST
Receiver, 1310 nm, Single Mode, Box, ST
1
RA-1900-C7S
Receiver, 1310 nm, Single Mode, Card, ST
1
XA-1903-1
Transmitter, 850 nm, Multimode, ST
10
XA-1903-3
Transmitter, 1310 nm, Multimode, ST
10
XP-1000A
115 volts AC, 50/60 Hz plug-in adaptor
XP-1001
230 volts AC, 50/60 Hz plug-in adaptor
AP-1000
Adapter Plate for use with the MCR-1000* card cage
• Please note that the card versions of these products are compatible with the model 6000A card
cage used with most FiberLink products and uses 1 slot .
• Box versions require the XP-1000A power supply, not included .
• The XA-1903 is a 1RU 19” rackmountable enclosure with internal power supply .
* Box versions can be adapted for use with the discontinued MCR-1000 rack by ordering the
AP1000 adapter plate .
Ordering Information
