Artecta Carlow 30, Manual

Page: 15 / 24

14
Ordercode: A0720060
Carlow 30
Slave Mode
With this menu you can set the device as a Master or Slave.
01)
Press the Mode button until the display shows .
If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master movement. If the device has been set to slave, it will react the same as
its master device.
DMX Addressing/ DMX configuration
With this menu you can set the DMX address and choose a DMX configuration.
01)
Press the Mode button until the display shows .
02) You can choose 512 different DMX addresses.
03) Use the Up/Down buttons to select the required address from .
Once you have set the desired DMX address, you can also choose the desired DMX Mode.
04) Press the Setup button to choose one of the 3 different DMX Modes. Use the Up/Down buttons to
select 5, 7 or 9 channels DMX mode.
Static Color control
With this menu you can manually set a desired color.
01)
Press the Mode button until the display shows .
02) Press the Setup button to open this menu.
03) You can use the Setup button to scroll through the 5 color options.
04) Use the Up/Down buttons to change the values.
Gradual adjustment red (0-255)
Gradual adjustment green (0-255)
Gradual adjustment blue (0-255)
Gradual adjustment white (0-255)
Gradual adjustment amber (0-255)
You can combine Red, Green, Blue, White and Amber to create an infinite range of colors (0-255).
Reset factory settings
Hold at the same time the Mode and Setup button for a few seconds. The Carlow 30 will reset to the
factory settings. The fixture will start up in the Auto Run mode.