19
Display Track Profile 50 SW
Product code: A0320160 / A0320161
Changing the Gobo
To change the gobo, follow the steps below:
01)
Remove the retaining ring from the gobo holder (13) with needle-nose pliers or a similar sharp tool.
02)
Change the metal gobo. Make sure that the painted (black) side of the gobo is facing upwards as
shown in Fig. 27. When inserted back into the gobo slot, the painted (black) side should be facing
the lens (08).
Fig. 27
Fig. 28
03)
Place the retaining ring back on the gobo holder (13).
