Operating Your Doggy Robot
23
Doggy Robot
Turn the switch of the battery box on and your robot will start walking.
⑥
Put your hand in front of the reflective infrared sensor and your robot should move
its head in the direction you move your hand.
⑦
When your robot recognizes sound, it should stop as shown in the picture below
★Your robot may not respond to low volume sounds.
⑧
Immediately turn the switch to off if your robot does not begin walking as
shown in the picture below. Not doing so may damage the servomotor.
If your robot does not move, the servomotor may be in the wrong position or
the blocks may be improperly connected. Re-read the Assembly Instructions
to make sure that your robot has been assembled correctly.
Summary of Contents for Doggy Robot
