Note: 1. See user manuals for more information. 2. For better readability, please print this document with laser printer. 3. Version: AS-3310-BTQGENV1.6.
ARTDEV - Leopoldstr. 2-8 - D-32051 Herford
Turn off/on handheld unit
1.
If you want to turn off the handheld unit, scan the
barcode as shown right.
2.
If you want to turn off the handheld unit via trigger key, please press and hold the
trigger key, after the laser beam turns off, wait for another 5 seconds, the handheld
unit will be turned off, then you can release the trigger key at this moment.
3.
If you want to turn on the handheld unit again, please keep the trigger key being
pressing for 3 seconds.
Quick setting to wireless network
1.
Make sure that both the handheld unit and the cradle are in
normal working mode. Normally it means that only the blue
LED on the cradle are ON.
2.
The handheld terminal scans the connection barcode at the
bottom of the base, and the handheld terminal will attempt to
connect to the base. At the same time, the handheld terminal
will make beep-beep-beep sound.
3.
If the connection is successful, the handheld terminal can be used directly. If the
connection is unsuccessful, the handheld terminal will make a beep
——
beep
——
sound, and the red LED on the handheld will blinks 2 times, and then turns off.
4.
If you want to disconnect, you can scan the barcode as shown below.
Bluetooth mode
HID mode
SPP mode
Cradle mode*
Scan mode
Good-read off
Momentary*
Alternate
Initialization settings and information display
Vibration indication
Disable
Enable*
Beeper indication
Disable
Enable*
Volume of beeper
Low
Middle
High*
German keyboard layout
Note: The factory default settings are indicated with asterisks (*).
Some parameters of handheld unit return to
default setting
All parameters of handheld unit return to
default setting
Return to default setting of cradle
Handheld unit firmware version display
Cradle firmware version display
Bluetooth version display
Bluetooth MAC address display
Bluetooth name display
