4
DMPA SPECIFICATIONS
Dimensions........................................................... 6.5” D x 19.0” W x 3.5” H
Weight .................................................................. 12 Lb.
Frequency Response………………………………. 15Hz to 48 kHz (+0, -1dB) @ normal plate voltage
15Hz to 120 kHz (+0, -1dB) @ high plate voltage
Dynamic range ..................................................... >110dB (“A” weighted)
CMRR................................................................... >90dB
THD ...................................................................... <0.005% (typical)
Equivalent Input Noise.......................................... -133dBu (XLR, “A” weighted)
Maximum Input Level............................................ +20dBu (cannon)
Maximum Instrument Input ................................... +17dBu
Input Impedance................................................... 150-3000 Ohms adjustable (XLR) >800K Ohms (Instrument)
Maximum Output Level......................................... +27dBu (XLR)
Output Impedance ................................................ < 47 Ohms (XLR)
Maximum Gain ..................................................... 75dB
Meter Calibration .................................................. 0 VU = +4dBu output
High Pass Filter .................................................... single pole, 10-200 Hz adjustable
Power Requirements ............................................ 100-125 VAC, 25W. Export Units configured for country of destination
Digital Section:
A/D Frequency Response
@44.1KHz sample rate ........................................ 10Hz to 21.25KHz (+0, -1dB)
@88.2KHz sample rate ........................................ 10Hz to 42.50KHz (+0, -1dB)
@196KHz sample rate ......................................... 10Hz to 81KHz (+0, -1dB)
A/D Dynamic Range ............................................. >115dB “A” weighted (typ.)
A/D THD ............................................................... <0.001% @1K (typ.)
A/D Input Sensitivity.............................................. +12dBu min
A/D Insert Input Impedance…………………………>10K Ohms
The AR
T Digital MPA™ is ADAT licensed.
