8
Mounting & Rigging
The Spot may be mounted in any safe position provided there is
adequate room for ventilation.
Be sure that the structure can support 10 times the
weight of the fixture. Please see the “Technical Specifications”
section of this manual for a detailed weight listing. Mount the
fixture securely. Two hanging clamps for truss mounting may be
used, or nuts and bolts for permanent installation may be used.
The holes in each bracket are 13 mm in size. When rigging,
consider routine maintenance and control panel access. Please
see the following steps for installation.
●
If the power link out is intended to be used with multiple
fixture, take into account the length of each power cable,
and mount the fixtures close enough to one another to
accommodate for this.
●
Attach both included bolts in the locations indicated below,
using a metric 8 mm Allen wrench.
●
Attached 2 hanging clamps to the bracket in each of the two
locations indicated below
●
Safety cables must always be used.
Do NOT mount this fixture sideways!
