Art Lighting Production WL 150 DIM, User Manual

Page: 8 / 14

WL 150 DIM / USER MANUAL / ENGLISH
6
02
Setting of the DMX channel. Using the pushbuttons below the display set the required
DMX channel. The set value does not require the confirmation. As the confirmation of
the new setting the new value will automatically flashes.
2.3 STROBO MODE
ACTIVATION / DEACTIVATION STROBO MODE
1. Using the buttons UP and DOWN set the DMX address 511.
2. Wait for confirmation (flashing) and press the button UP and hold it down until the
luminaire will switch into service mode.
3. Using the buttons UP and DOWN scroll to the symbol 6.c.0. The number 6 is the
identifier of the strobo function and zero at the end means that the function is de-
activated.
4. Press both buttons UP and DOWN simultaneously and wait until the number 6
starts flashing.
5. When pressing the button UP you will switch the 0 to 1 and the STROBO function
(2. channel) is activated. The symbol has changed to 6.c.1 (the second DMX channel
STROBO is active).
6. Back to the operating mode you will return using the button DOWN.
2.4 WORKLIGHT MODE
ACTIVATION / DEACTIVATION WORKLIGHT MODE
1. Using the buttons UP and DOWN set the DMX address 511.
2. Wait for confirmation (flashing) and press the button UP and hold it down until the
luminaire will switch into service mode.
3. Using the buttons UP and DOWN scroll to the symbol 7.c.1. The number 7 is the
identifier of the WORKLIGHT function and the digit 1 at the end means that the
function is activated.
4. Press both buttons UP and DOWN simultaneously and wait until the number 7
starts flashing.
5. When pressing the button UP you will switch the digit 1 to 0 and thus the WORK-
LIGHT function will be deactivated. The symbol has changed to 7.c.0 (the WORK-
STROBO / WORKLIGHT