www.art-fire.com
Art Fireplace Technology Limited
4
3, PREPARATION OF THE DEVICE BEFORE USE
Remove the packaging of your device.
Keep the plastic tube, remote controller, power plug, etc
Verify that there is no object in the device. Remove it if necessary.
Devices MUST BE mounted on the wall, fixed on the ground or built-in.
Fireplaces installation
A mounting bar with holes is supplied with wall fireplaces
Use a spirit level to ensure that the bar is straight; fix it by using appropriate screws according to
the type of chosen wall.
With the help of another person, hang the fireplace in position.
Check that the fireplace has a right level by using a spirit level.
Burners Installation
Build-in the burners according to the flame level.
Check that the fireplace has a right level by using a spirit level.
4, SPECIAL PRECAUTIONS FOR INSTALLATION
Do not cover the device.
Do not put objects on the device when functioning.
Leave a free access to the control buttons.
Do not leave curtains or lace curtains within 1 meter of the device.
Do not use in a room with draught.
Warn people around you, particularly children.
5, POWER SUPPLY CONNECTION
Before positioning, the device must be connected with the socket to the power supply.
Each unit is equipped with a power plug.
EU Plug/UK Plug/US Plug/AU Plug etc…
110V-240V Power available.
6, FILLING OF THE TANK
About Filling the tank, We use “
Water In
”
D
function.
prepare a container with pure water inside, one side of the plastic tube connect to
the external tube “
D
” and another side in the pure water container, keep
pressing the Button “
D
” for
3 seconds
, the left button “
D
” will turns blue and the
pump will automatically pump water into the tank. And pump stop
automatically when water comes to maximum level.
