7-10
Instructions for use and warnings
CHAPTER 7 - Maintenance
7.2.4.1
General
cleaning
The machine must be kept in a good condition of cleanliness.
Proceed as described below to
give the machine a general clean
:
Step
Action
1
Disconnect the power and air supply of the machine.
2
Manually remove any product residues.
3
Remove the dirt with non-flammable and non-toxic commercial cleaning solvents.
4
If necessary, use a vacuum cleaner to remove any residues from the rotating surface.
5
After cleaning, restore all machine connections.
iMPORTAnT!
The machine must be given a general clean whenever the type of component to be processed is changed,
in order to remove any residues from previous processes.
Summary of Contents for FlexiBowl 350
Page 6: ...0 6 Instructions for use and warnings TABLE OF CONTENTS PAGE INTENTIONALLY LEFT BLANK...
Page 24: ...3 6 Instructions for use and warnings CHAPTER 3 Safety measures PAGE INTENTIONALLY LEFT BLANK...
Page 82: ...9 2 Instructions for use and warnings CHAPTER 9 Attachments PAGE INTENTIONALLY LEFT BLANK...
