Arrowquip PORTABLE Q-CATCH 74 Series, Product Manual

Page: 5 / 52

RISK ASSESSMENT
Conduct a risk assessment on procedures for which the equipment is used and establish a safe
work procedure.
1. Ensure all users of the equipment have been inducted and comply with safe working
procedure.
2. Please ensure that there are NO large or hazardous objects inside the equipment that may
cause injury to the animal or operator, or may cause the equipment to malfunction.
3. Make sure that your equipment has been cleared of ALL livestock after use.
4. Some chemicals and medicines can damage powder coat. Take all precautions and wash
after use.
5. Maximum speed 40km/25mph
6. Maintain tire pressure of 80 psi.
7. Check wheel lug nuts after 10, 25, 50 miles of use, ensure torqued to 120 ft. lbs.
a. This applies to first time use and wheel changes.
TRANSPORTING THE Q-CATCH 74 SERIES PORTABLE
WORKING SYSTEM
WARNING: FOLLOW ALL INSTRUCTIONS OUTLINED HEREIN
CAREFULLY TO ENSURE OPERATOR SAFETY WHEN
READYING THE UNIT FOR TRANSPORT.
RISK ASSESSMENT | 2
REQUIREMENTS:
- Level ground
- 2 people
REFERENCE FOR MANUAL JACKS
For manual jack control, refer below:
JACK UP JACK DOWN