10
STEP 6: Use load strap to secure chute to trailer according to the following
instructions.
1. Separate two pieces of ratchet strap.
2. Place strap through the frame of the chute, behind the front 2x2 frame.
a.
NOTE: Do not put the strap directly behind the head gate.
Over time, this may negatively affect the head gate and cause it to
malfunction.
3. Run strap through the needle door on the opposite side of the chute.
4. Reattach ratchet strap pieces.
5. Connect strap hooks onto the front of the trailer.
6. Tighten ratchet strap until chute is securely fitted to the trailer.
7. Tie up any extra length on the strap, so that it is not dragging during
towing.