The door jambs reinforce the door
opening and provide an attractive
trim. The splice posts support the
walls.
1
Position
splice post
at the center
of the rear wall and fasten using nuts
and bolts into rear wall angle and
screws into rear floor frame.
Hint:
Measure or count holes to de-
termine if post is centered on rear.
2
Fasten
side splice posts
to the
sides of building using screws.
Angled end of posts must be on top.
3
Fasten the top of the
door jambs
to the door track with two screws. Do
the same for the bottom into frame.
Notched edge faces toward center of
building.
●
●
●
●
●
9195 Splice Post (1)
●
●
●
●
●
9198 Side Splice Post (2)
●
●
●
●
●
9194 Door Jamb (2)
●
Parts Needed For
●
Splice Post/Door Jamb
Step 7
SW20
20
STEP
3
1
STEP
STEP
2
ANGLED END OF
SPLICE POST MUST
BE ON TOP
9198
9198
9195
9194
9194
FRONT
NOTCHED EDGE
MUST FACE CENTER
OF BUILDING
Washer
FRONT
