The studs provide a surface for at-
taching the siding panels.
1
Following dimensions, measur-
ing from the ends of angles, place a
stud
between each corner and splice
post at the rear and two on sides of
building. Position stud inside top
angle and fasten with a screw.
2
Rest bottom tab (large hole) out-
side floor frame. Do not fasten tab at
this time. Repeat procedure for the
remaining studs around the building.
●
●
●
●
●
9199 Siding Stud (10)
●
Parts Needed For
●
Studs
Step 8
SW21
21
STEP
2
1
STEP
LARGE HOLE
47 9/16"
21 15/16"
9199
DO NOT FASTEN TAB
AT THIS TIME
29 3/16"
FRONT
