180°
Assembly Instructions
SUZI Storage Sidekick
Page 3
Understanding How the “ARROW-LOC” Cam Fastener Works
Cabinet Assembly
Position bolt in
pre-drilled hole and
turn until tight.
Press cam Into pre-drilled
hole until flush with surface.
Insert bolt through pre-drilled
hole in edge of panel.
To lock, rotate cam
until tight, using
allen key provided
or screwdriver.
ARROW TOWARDS
HOLE IN EDGE!
FIG. 1.
Door Magnet
Door Hinge
Step 1.
Place Top (E), Bottom (F), Back (B), Left
and Right Sides (C, D) on a flat protected surface
(to prevent scratching of part). Thread Connecting
Bolts (12 total) into pre-drilled holes (as shown In
FIG. 1). Install Cams (12 total) by pushing a Cam
into each hole flush with surface. The arrow on the
Cams should be turned to face the hole, in each
edge where the Connecting Bolts will enter, using
a regular screwdriver or Allen Key provided.
Connecting Bolts
x12
Cams
x12
B
C
D
E
F