35
Roof Panel
2
7483
Roof Panel
2
6529
Attach Panels #5 - #8 according to the diagram on page 33.
Weather stripping tape should
be applied in one continuous
strip along the length of the roof.
You will need for this page:
(QTY: 4)
(QTY: 32)
DO NOT FASTEN
AT THIS TIME
FASTEN TO NEXT PANEL WITH BOLT AND NUT
FASTEN TO ROOF BEAMS WITH SCREWS
FASTEN TO RIDGE CAP (NEXT TWO PAGES)
Step 14: Roof Assembly
Cut four (4) strips of weather stripping 2” (5,1
cm) long from the roll of weather stripping
tape and put aside for later use. Begin weather
stripping the roof ridge. Apply more of the weather
stripping after each additional Panel is installed.
1
3
Do not fasten the holes on the lower end of the
Panels. Do not install Panels #9 or #10 yet.
Double check that Panels are installed in the
correct position. The part numbers listed in the Roof
Panel Placement diagram on page 33 must match the
numbers inked on the Panels.
2
Attach Panels #5 - #8 in the order given in the
diagram on page 33. Use the diagram to the left
while assembling the roof.
7483
7483
6529
6529
35BH
