background image

Model No.

   EH86-A

     EH86S

       LM86

   ML86-A

 SA8662-A

VL8662-A

   WL86-A

Owner's Manual & Assembly Instructions

           P01

709140210

                                             Exterior Dimensions                     Interior Dimensions                    Door

       *Approx.              Base                      (Roof Edge to Roof Edge)                      (Wall to Wall)                      Opening
           Size                  Size                    Width       Depth       Height           Width       Depth      Height       Width     Height

          8' x 6'        97 1/2" x 68 3/4"            99 3/4"      71 1/4"      69 7/8"          94 3/4"        66"         68 5/8"      43 1/2"       60"

Missing Parts, Questions on Assembly?

Call:  1-800-851-1085

Do not return to dealer, they are not

equipped to handle your requests.

  Storage Area:   43 Sq. Ft.

237 Cu. Ft.

                4,0 m

2

               6,7 m

3

BUILDING DIMENSIONS  

* Size rounded off to the nearest foot

2,4 m x 1,7 m  247,7 cm x 174,6 cm           253,4 cm     181,0 cm     177,5 cm           240,7 cm    167,6 cm     174,3 cm     110,5 cm   152,4 cm

CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
WHEN HANDLING METAL PARTS.

Summary of Contents for EH86-A

































Reviews: