Parts Needed For
Angles/Gables/Roof Beam
Step 6
BP19
9728 Side Wall Angle (2)
9448 Left Gable (2)
9449 Right Gable (2)
Roof Beam Assembly (1)
The gables go on top of the front and
rear walls to support the roof beams.
1
Fasten the side wall angles
across the top of the side panels us-
ing screws. Side wall angles must
overlap rear wall angle in corners.
NOTE
The gables are packed nested to-
gether and might be mistaken
as one piece. Carefully separate
them before continuing.
2
Lift and fasten a right and left
gable, under angle at corner, to the
door track with screws.
3
Join the left and right gables to-
gether using bolts and nuts in the
bottom 2 holes.
Repeat Steps 2 & 3 for the opposite
end of building.
4
Fastent the roof beam assembly,
small holes on top, to the gable legs
of the front gables, with bolts & nuts.
Roof Beam Assembly
STEP
1
Gable
STEP
2
9728
5
Fasten the other end of the roof
beam to the gable legs of the rear
gables.
9448
9449
9728
9448
9449
STEP
3
STEP
5
STEP
4
19
Summary of Contents for EH54-A
Page 13: ...Assembly by Key No BP13 13...
