Pinout Information for MAX 10 FPGA I/O
BeMicro Max 10 Getting Started User Guide, Version 14.0
23
3.7 Boot Select
Jumper J3 is used to strap the MAX 10 FPGA device’s BOOT_SEL pin. The 10M08 device supports holding two FPGA
images is its Configuration Flash Memory. The BOOT_SEL pin can be used to allow the user to select which image is
loaded by default on power up.
Pinout Information for MAX 10 FPGA I/O
BeMicro Max 10 Getting Started User Guide, Version 14.0
23
3.7 Boot Select
Jumper J3 is used to strap the MAX 10 FPGA device’s BOOT_SEL pin. The 10M08 device supports holding two FPGA
images is its Configuration Flash Memory. The BOOT_SEL pin can be used to allow the user to select which image is
loaded by default on power up.
Pinout Information for MAX 10 FPGA I/O
BeMicro Max 10 Getting Started User Guide, Version 14.0
23
3.7 Boot Select
Jumper J3 is used to strap the MAX 10 FPGA device’s BOOT_SEL pin. The 10M08 device supports holding two FPGA
images is its Configuration Flash Memory. The BOOT_SEL pin can be used to allow the user to select which image is
loaded by default on power up.
