1
Install the second ridge cap over-
lapping the first ridge cap while in-
stalling the remaining roof panels.
Continue weather stripping the ridge.
2
Fasten the lower end of the panels
to the side wall angles using screws
and washers. Use bolts and nuts
through wall angle overlaps at he
bottom of the panel.
●
●
●
●
●
8486 Ridge Cap (1)
●
●
●
●
●
7571 Roof Panel (2)
●
●
●
●
●
8840 Ridge Cap (1)
●
●
●
●
●
8485 Left Side Roof Trim (2)
●
●
●
●
●
8836 Right Side Roof Trim (2)
●
Parts Needed For
●
Panels/Ridge Cap/Trim
Step 16
G29
29
STEP
1
STEP
2
Tuck Flange
Inward to Fit
Inside of
Roof Trim Cap
8486
Roof Trim
Arrow Logo
Goes on Front
of Building
3
STEP
STEP
5
8836
6
3
Attach the right and left side roof
trim to the lower end of the roof pan-
els on each side of the building using
screws at each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
4
Using your thumb and index fin-
ger, overbend the bottom flange of
the side roof trim at the corner inward
enough so the right and left roof trim
caps fit onto right and left corners.
5
Fasten the roof trim caps to the
side trim using a screw.
6
Fasten the roof panel rib, peak
cap and ridge cap together using
bolts and nuts. Fasten the remaining
peak cap in the same manner.
8836
STEP
4
STEP
Cut Weather Stripping
Tape and Fold Under
7571
8485
Roof Trim Cap
8485
