Parts Needed For
Gable Assemblies
Step 11
7906 Right Gable (2)
7907 Left Gable (2)
7916 Roof Beam Bracket (4)
24
STEP
1
Washer
(8)
The gables go on top of the front and
rear walls to support the roof beams.
NOTE
The gables are packed nested
together and might be mistaken
as one piece. Carefully separate
them before continuing.
1
Apply edge trim to the top edge
of the right gables and left gables.
2
Attach the four roof beam
brackets to the gables using two
bolts, washers and nuts.
NOTE
Mounting leg of bracket must
face toward center of gable
and holes closest together
must be on top
To avoid mishap on the sharp
edge the edge trim must remain
in place on the top edge of the
gable until right and left roof
panels are in place.
CAUTION:
Edge Trim
(Plastic Piece)
STEP
2
BT24
7906
FRONT
7907
7916
Roof Beam
Brackets
