background image

Model No.     697.68220     DW1010HG

Owner's Manual & Assembly Instructions

      WO01

 

                                                Exterior Dimensions                     Interior Dimensions                     Door

       *Approx.                 Base                    (Roof Edge to Roof Edge)                      (Wall to Wall)                         Opening

           Size                     Size                    Width       Depth       Height           Width       Depth      Height         Width     Height      

  

        10' x 10'           121" x 114 1/2"        123 1/4"       117"         81 3/8"         118 1/4"    111 3/4"      80 1/8"       55 1/2"       60"       

 

3,0 m x 2,8 m   307,3 cm x 290,8 cm      313,1 cm     297,2 cm      206,7 cm        300,4 cm     283,8 cm     203,5 cm      141,0 cm    152,4 cm  

715490217

Missing Parts, Questions on Assembly?

Call:  1-800-851-1085 or 

[email protected]

Do not return to dealer, they are not 

equipped to handle your requests.

  Storage Area:    92 Sq. Ft. 545 Cu. Ft.

 

                 8,5 m

2

             15,4 m

3

 

 

BUILDING DIMENSIONS  * Size rounded off  to the nearest foot

CAUTION: SOME PARTS HAVE SHARP EDGES. CARE

MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES

TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ

SAFETY INFORMATION PROVIDED IN THIS MANUAL

BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES

WHEN HANDLING METAL PARTS.

Summary of Contents for 697.68220

































Reviews: