Arris Touchstone TM722 User Manual Download Page 27

Page: 27 / 73

Installing USB Drivers on Your PC

When you plug the Telephony Modem into the PC’s USB port, Windows automati-

cally detects the hardware and begins installing the USB drivers. This procedure

does not explain how to provision the modem or otherwise initiate actual service.

The latest USB drivers and documentation are available on line at:

http://www.arrisi.com/support/usb/index.asp

Note

: Not all Telephony Modems are equipped with a USB port.

Requirements

Make sure you have the following before attempting to install the USB drivers:

• PC with:

— CD-ROM drive

Note:

A mini CD adapter is required for slot-loading drives. Adapter is

not included.

— at least one free USB port
— one of: Windows 2000, Windows XP, Windows Vista, or Windows 7 (Win-

dows 95, Windows 98, and Windows NT are not supported)

— ARRIS USB Driver CD

•

USB

A/B Cable

of appropriate length (a cable is included in your Telephony

Modem package)

•

(for installations not using DHCP) IP address, subnet, gateway, and DNS in-

formation

Installation Instructions

Select the link for your operating system to read the installation instructions.

•

Installing USB Drivers on Windows 2000

•

Installing USB Drivers on Windows XP

•

Installing USB Drivers on Windows Vista

•

Installing USB Drivers on Windows 7

Touchstone TM722 Telephony Modem User’s Guide

Summary of Contents for Touchstone TM722










































































Search results

Summary of Contents for Touchstone TM722

Reviews:

Related manuals for Touchstone TM722

Brands by name

Popular brands

Arris Touchstone TM722, User Manual

Search results

Summary of Contents for Touchstone TM722

Reviews:

Related manuals for Touchstone TM722

Brands by name

Popular brands