Chapter 5
:
Installing and Connecting your Telephony Gateway
Release 24 STANDARD 1.2 August 2016
Touchstone TG1682G Telephony Gateway User Guide
© 2014-2016 ARRIS Enterprises LLC. All Rights Reserved.
27
2.
Insert the plug from the power cord into the Power connector on the back of the
Telephony Gateway (
8
) and insert the power cord into a convenient AC outlet.
The Power light on the front of the Telephony Gateway lights up, then flashes once (refer
to the LED tables shown in
Using the Telephony Gateway
(page 31)). See
Troubleshooting
(page 38) if the Power light does not turn on.
3.
Connect one end of the Ethernet cable to any Ethernet port on the back of the Telephony
Gateway, (
5
) and the other end to the Ethernet port on a computer, hub, or broadband
router.
Note:
If you are connecting to a computer, use the Ethernet cable included in the
Telephony Gateway package.
4.
Connect one end of the telephone cable to the telephone port on the back of the
Telephony Gateway (
3
or
4
). Connect the other end to the telephone.
Configuring Your Wireless Connection
The TG1682G ships with wireless LAN security set by default. See the security label on your
product for the factory security settings.
Note:
You must set up your computer and other client devices to work with the security
settings on the TG1682G. Refer to the documentation for your client device for instructions on
setting security. On most computer systems you only need to select the network name (SSID)
device and enter the encryption key. If your computer or client device supports Wi-Fi Alliance
WPS (Wireless Protected Setup), activate WPS on your computer or client device and the
TG1682G simultaneously to easily set up your system security.
1.
Security Label
If you need to modify the Telephony Gateway’s default wireless security settings, or if you
want to configure any other wireless LAN settings, refer to the following instructions.
