Arris NVG595 Administrator'S Handbook Download Page 20

Page: 20 / 226

Administrator’s Handbook

Accessing the Web Management Interface

1. Run your Web browser application, such as Firefox or Microsoft Internet Explorer, from the computer con-

nected to the ARRIS

Gateway.

2. Enter

http://192.168.7.254

in the Location text box. Once the network type is determined, The Device Status

Page opens.

3. Check to make sure the Broadband and Service LEDs are lit

GREEN

to verify that the connection to the

Internet is active.

IP Diagnostics Page Redirect

In the event that your connection to the Internet fails, the

Broadband LED

will flash

RED

and you will be redi-

rected to the

IP Diagnostics

page.

Follow the on-screen troubleshooting suggestions.

Summary of Contents for NVG595



































































































































































































































Search results

Summary of Contents for NVG595

Reviews:

Related manuals for NVG595

Brands by name

Popular brands

Arris NVG595, Administrator'S Handbook

Search results

Summary of Contents for NVG595

Reviews:

Related manuals for NVG595

Brands by name

Popular brands