6
VIP2250 U-verse DVR Receiver Installation Manual
Connecting to an HDTV – Video Only
Sample HDTV
CABLE/
ANTENNA IN
Component
Video Input
Y
Pb
Pr
HDMI
VIP2200
TO WALL
(VIDEO IN)
HDMI
NETWORK
Pr
Y
OPTICAL
TO TV
(VIDEO OUT)
R
+12V
DC
POWER
USB
L
VIDEO OUT
AUDIO OUT
Pb
HDMI
connection
Component video
connection
Either / or
Video in
RF (75 Ohm)
connection
eSATA
•
Connect an RF coaxial cable to the cable wall outlet and the TO WALL (VIDEO IN)
connector on the TV receiver.
•
If your HDTV has an HDMI input, connect an HDMI cable to the HDMI connector.
HDMI connection carries both video and audio signals.
•
If your HDTV has a DVI input, you can use an HDMI to DVI converter to connect to the
VIP2250 HDMI connector.
•
If your HDTV has component video, connect component video cables to the Y, Pb, and
Pr connectors.
DVI and component video carry video signals only. To connect the audio, refer to the
following page. To connect to a home theater receiver, refer to “Connecting to a Home
Theater Receiver – Audio Only.”
