Page 39 of 42
usage: cellular_config [-h] [--serial SERIAL] [--baud BAUD]
[--ble_addr BLUETOOTH_ADDR] --root_ca ROOT_CA --cert
CERT --key KEY [--debug] [--verify]
--serial
local serial port for bridging via local serial port
(eg /dev/ttyUSB0)
--baud
set the serial port communications baud rate when
using local serial port (default 115200)
--ble_addr
bluetooth device address for bridging via BLE (ie
xx:xx:xx:xx:xx:xx)
--root_ca filename
(mandatory) filename of the CA certificate to store
in secure area on the device
--cert filename
(mandatory) filename of the device certificate to
store in secure area on the device
--key filename
(mandatory) filename of the device private key to
store in secure area on the device
--debug
enable debug level trace (for AT command debugging)
--verify
check if all the device
7.7.4. gps_almanac
usage: gps_almanac [-h] [--serial SERIAL] [--baud BAUD]
[--ble_addr BLUETOOTH_ADDR] --file FILE [--debug]
--serial
local serial port for bridging via local serial port
(eg /dev/ttyUSB0)
--baud
set the serial port communications baud rate when
using local serial port (default 115200)
--ble_addr
bluetooth device address for bridging via BLE (ie
xx:xx:xx:xx:xx:xx)
--file FILENAME
the mgaoffline.ubx filename to send to the u-blox
M8N device
7.7.5. gps_ascii_config
Arribada Horizon ARTIC R2 Developer’s Kit | User Manual