ARRI IVS, Instruction Manual

Page: 92 / 112

92
SUB MENU
> VITC ON
POS.1 10
POS.2 12
EXIT
SUB MENU
VITC ON
> POS.1 10
POS.2 12
EXIT
6.10.1 VITC
This sub menu line switches the insertion of VITC on ( ON )
and off ( OFF ).
• Move the cursor > with the keys ß and ü to the line
VITC . The keys ä and ö switch the insertion on
and off.
6.10.2 Position 1
The insertion of VITC can be single or multiple line between
line 6 and 22. If the same lines on position 1 and position 2
are selected, the insertion will be single line, otherwise
multiple line. The value of position 1 can be higher or
lower than that of position 2.
• Move the cursor > with the keys ß and ü to the line
POS. 1 . By pressing the key ä the value will be
increased until line 22 is selected. By pressing the
key ö the value will be decreased until line 6 is
reached.
Inser
ter Facilities