ARRIHEAD
9
• Slide the gear selector switch
➪
photo
to “1”
and loosen the friction lever
➪
photo
.
• To balance the camera, first loosen the left and
right tilt locks
➪
photo
and the locking lever
➪
photo
of the siding base. Shift the camera
on the tilt plate, until the “0” mark on the lower
cradle falls in line with the witness mark. Keep a
firm hold on the camera throughout, then re-
secure the three locking levers
➪
photo
.
gear selector switch
friction
locking lever for
hand wheel
tilt lock
locking lever for
sliding base
