manualshive.com logo in svg

ARRI ALEXA 35, User Manual, Page: 107 / 117

Share
Download
ARRI ALEXA 35 User Manual Download Page 107

ALEXA 35 Accessories

107

24.2.4 Other Accessories

Rear Accessory Bracket RAB-2

 K2.0034183

The Rear Accessory Bracket RAB-2 allows accessories to be mounted behind the

ALEXA 35. This can be done for organizational reasons or to better balance the cam-

era. The RAB-2's top attaches to the back side of the Top Extension Bracket TEB-1. The

RAB-2's bottom attaches to the back side of the Balance Utility Dovetail BUD-1.

Vertical Format Baseplate

 K2.0042610

The Vertical Format baseplate allows shooting with the ALEXA 35 on its side for Portrait

(“9:16”) and attaches to the ALEXA 35's right side and interfaces with Compact Bridge

Plates, Bridge Plate Adapters, Shoulder Pads and the Stabilizer Adapter Mounts.

Vertical Top Plate

 K2.0043666

The Vertical Top Plate attaches to the ALEXA 35's left side and acts as a top plate to

support the lightweight Camera Handle LCH-1.

Case for ALEXA 35

 K2.0040234

The Case for ALEXA 35 support the camera in various rigging configurations and has

cut-outs that fits specific support accessories, recording media and media readers. The

case features two large pockets for additional accessories.

Summary of Contents for ALEXA 35






















































































































Reviews:

No comments