ARREL Audio
R-506 User Manual, Issue 0.1
Page 6
Housing
The
R-506
dual band VCA compressor module has been designed to be compliant with
the 500-series standard.
Installation Instructions
Remove the R-506 module from the packaging.
Turn off the 500-series enclosure and remove mains power.
Find an empty slot in the 500-series rack and remove the 2 fastening screws,
positioned one on the top of the enclosure and one the bottom of the enclosure.
Insert the R-506 into the empty slot in the 500-series enclosure, Be sure that the
rear edge connector on the R-506 module mates correctly with the edge connector
of the 500-series enclosure.
Replace the 2 fastening screws through the top & bottom holes in the R-506 module
and screw into the 500-series enclosure. The module must be secured into the
enclosure before turning the mains on.
Apply mains power into the 500-series enclosure and turn on.
The module is not designed to be hot-plugged, so please ensure the power to the
500-series enclosure is OFF before inserting or removing a module (this
recommendation is useful in order to protect the 500 enclosure circuits, our product
due to a very robust construction could be hot-plugged without problems).
