array K KT20, User Manual

Page: 15 / 20

15
PRELIMINARY
KT20 - KT22 - KT20c - KT22c
KT20c - KT22c TECHNICAL DETAILS
KT20C - KT22C
Acoustics
Speaker power handling 18 W
(AES)
Max power 30 W
1
Impedance 8 Ω (KT20) - 32 Ω (KT22)
Frequency range 150 HZ - 18 KHz +/- 3dB
SPL 1W/1mt 87 dB
2
Maximum SPL 101 dB continuous - 107 dB peak
Coverage
Horizontal
90°
Vertical
90°
Crossover
Type External cross over required
Frequency
150Hz 24dB/oct minimum suggested
Transducers
Full-range
2” Neodymium cone driver with 0.75” voice coil
Audio Input
Connector
2-pin Phoenix connector
Selection Switch
Channel -
Vertical dispersion
-
for KT20/KT20C
KA1-1, KA3-3, KA7, KA7-7, KA10, KA10-10
for up to 2 units each channel, with dedicated preset
for KT22/KT22C
KA3-3, KA7, KA7-7, KA10, KA10-10
for up to 8 units each channel, with dedicated preset
Physical
Dimensions 8.5 cm dia x 9.6 cm deep (3.35” dia x 3.78” deep)
Weight 0.40 Kg (0.88 lbs)
Notes for data
1. Maximum RMS applicable power for a musical signal, the reference signal is the
one proposed by EIAJ standard.
2. Measured @4 mt then scaled @1 mt
New materials and design are introduced into existing products without previous
notice. Present systems may differ in some respects from those presented in this
brochure.