2
6
format the micro SD card.
●
No image display on TV screen
Please confirm the HDMI cable is connected correctly, and the TV is set to the correct
HDMI mode.
●
Image is blurred
Maybe the lens or windshield is not clean; please check if there is dust, fingerprint, or
something else on the leans. Use leans cleaner to clean the leans before using.
Please remember to remove the lens protecting film before first use.
●
Image has horizontal stripes interference
This is due to the wrong setting of “Flicker”, please adjust it depending the local power
supply frequency, and reset the Flicker: 50Hz / 60Hz.
●
Camera
doesn’t auto start recording when the car engine is started.
Please make sure the Movie Clip Time is 1 / 3 / 5 minutes, not OFF, it will not auto
start recording when Movie Clip Time is OFF if the card is full.
●
The camera continues automati
c recording and won’t stop
Maybe the camera is working on Motion Detect mode; you can check whether there is
an red eye icon on the screen. When the Motion Detection is ON, it will auto start
recording when a moving object appears within the range of camera. When the motion
ceases, the recording will stop automatically until a moving object appears again. It is
not easy to turn Motion Detection function off with the camera in hands.
●
The camera is suddenly turned off
Turn on again the camera, connect with the power.
