arovec AV-P300, User Manual

Page: 10 / 24

• In sleep mode, the air purifier runs quietly on lowest fan speed and
all indicators turn off including air quality light except sleep
indicator.
• Tap ( ) to enter the sleep mode. The sleep indicator will blinking
for 3-5s, then the air purifier enters to the sleep mode.
• When the air purifier is running in Sleep mode, the �mer, night
light and child lock can be controlled independently by their
related bu�ons.
• To end the sleep mode tap ( ) or ( ).
SLEEP MODE Bu�on:
• The LED light is the air quality indicator in four different colours.
[ Table 2 ]
AIR QUALITY LIGHT / DISPLAY-OFF Bu�on:
• Tap once the ( ) to turn ON or OFF the air quality light.
• When the air purifier is running, the LED light colour will change
according to the detected air quality.
• Hold ( ) for 3-5s to turn OFF all the indicators and light.
• The LED light can be used as a night light with orange colour even if
the air purifier is not running.
- Tap once ( ) to turn on the night light into full brightness.
- 2 tap ( ) to change the night light into half brightness.
- 3 tap ( ) to turn off the night light.
nd
rd
Colour
Blue
Green
Orange
Red
Air Quality
Very Good
Good
Moderate
Bad
PM2.5 level (µg/m3)
0 – 49.9
50 – 99.9
100 – 149.9
> 150
Note: It will take 1 minute for the dust sensor to detect the air quality a�er the Air Purifier turned on.
Air Quality Indicator Table
[ Table 2 ]
10