arovec AroDeluxe-120, User Manual

Page: 12 / 20

12
TROUBLESHOOTING
Here are some �ps to try if your essen�al oil diffuser isn’t working properly.
If your problem isn’t listed in the above table, please contact customer support at
support@arovec.com.au for assistance.
Problem Possible Solu�on
AroDeluxe-120 won’t turn on or
bu�on not working.
Air blows but water mist is not
produced.
Reduced mist level.
The mist has a bad smell.
White dust is forming on nearby
furniture.
AroDeluxe-120 stopped working.
Increased noise level.
Plug into a powered electrical outlet.
Try plugging the AroDeluxe-120 into a different outlet.
The power adapter is not connected perfectly into the AroDeluxe-120.
AroDeluxe-120 or the adapter might be damaged.
Make sure the water level isn’t beyond the MAX level of water tank.
Clean the par�cles se�lement or essen�al oil clogging from the water
tank.
Try plugging the AroDeluxe-120 into a different outlet.
Check if there is enough water in the water tank.
Make sure the water level isn’t beyond the MAX level of water tank.
Make sure the outer cover is correctly a�ached.
The water in the unit is too cold, replace with room temperature water.
Do not fill with hot water, room temperature water is recommended.
Clean the water tank thoroughly and fill it with fresh water.
Clean the water tank for every oil change. Some essen�al oils are not
completely soluble in water and it may remain in the water tank, which
cause unpleasant odour if mixed with another essen�al oil.
Hard water may deposit a certain kind of dust. Dust in the air also
se�les because of added humidity in the room. Use dis�lled water if
this becomes a nuisance.
Check if there is enough water in the water tank.
AroDeluxe-120 must be placed on a flat, level and hard surface.
A foreign object might be stuck inside the AroDeluxe-120.