1
INTRODUCTION
Thank you for choosing our product.
The accessories described in this manual are of the highest quality, carefully
designed and built in order to ensure excellent performance.
This manual contains detailed instructions on how to install and use the product.
This manual must be stored in a safe place and CONSULTED BEFORE USING
THE DEVICE for proper usage instructions as well as maximum performance
from the device itself.
NOTE:
Some images contained in this document are for informational purposes
only and may not faithfully demonstrate the parts of the product they represent.
Symbols used in this manual:
Warning
Indicates important information that must not be
ignored.
Information
Provides notes and useful suggestions for the User.
2
SAFETY
This part of the manual contains SAFETY precautions that must be followed
scrupulously.
The device has been designed for professional use and is therefore not
suitable for use in the home.
The device has been designed to operate only in closed environments. It
should be installed in rooms where there are no inflammable liquids, gas or
other harmful substances.
Take care that no water or liquids and/or foreign bodies fall into the device.
In the event of a fault and/or impaired operation of the device, do not attempt
to repair it but contact the authorized service centre.
The device must be used exclusively for the purpose for which it was
designed. Any other use is to be considered improper and as such
dangerous. The manufacturer declines all responsibility for damage caused
by improper, wrong and unreasonable use.
ENVIRONMENTAL PROTECTION
Our company devotes abundant resources to analyzing environmental aspects in
the development of its products. All our products pursue the objectives defined in
the environmental management system developed by the company in compliance
with applicable standards.
Hazardous materials such as CFCs, HCFCs or asbestos have not been used in
this product.
When evaluating packaging, the choice of material has been made favoring
recyclable materials.
Please separate the different material of which the packaging is made and dispose
of all material in compliance with applicable standards in the country in which the
product is used.
3
DISPOSING OF THE PRODUCT
The device contains internal material which (in case of dismantling/disposal) are
considered TOXIC, such as electronic circuit boards. Treat these materials
according to the laws in force, contacting qualified centers. Proper disposal
contributes to respect for the environment and human health.
© The reproduction of any part of this manual, even in part, is prohibited unless
authorized by the manufacturer.
The manufacturer reserves the right to change the product described at any time
without prior notice for improvement purposes.
4
DESCRIPTION
NetMan 204
Solar is a device that allows inverter management through a LAN
(Local Area Network); the accessory supports the following network protocols:
x
Modbus/TCP – see more on Modbus mapping on the manual XXXXXXX
x
RFB Protocol (version 3.8) – Use any VNC compatible application to connect
to the board to see its virtual display
x
Sunvision 2 proprietary UDP protocol
x
Ftp protocol
The board is compatible with Ethernet 10/100Mbps IPv4/6 networks. The inverter
can therefore be integrated easily into medium and large-sized networks.
The device also records inverter values and events in the history log.
To view historical data you can use the
SirioDataControl
software or
Sunvision 2
software.
F
RONT PANEL
A: Network port
B: Led
C: Reset button
D: Micro-USB port
E: Serial port
Network port
NetMan 204
connects to 10/100 Mbps Ethernet networks by means of connector
RJ45. The LEDs built into the connector describe the status of the network:
x
Left LED:
SOLID YELLOW: NetMan204 has detected a valid link.
FLASHING YELLOW: NetMan204 is receiving or transmitting data packets.
x
Right LED
SOLID GREEN: NetMan204 is connected to a network operating at 100
Megabits per second.
