User Manual
User Manual
09
08
en
Specifications
en
Troubleshooting
Please refer to the table below in the event of the product
operating abnormally.
If product doesn’t work well, please refer to the following points
before requesting repairs:
Will not switch on
or switch off
•
Is there enough water in the tank?
Please add water to the tank.
•
Is the power cord connected properly?
Please disconnect, check cables and re-connect
carefully.
No mist or
abnormal mist
•
Not enough water? or too much water?
Please add suitable amount of water in the tank,
water must never be filled over 200ML (MAX) line.
•
Dirt on the ultrasonic plate?
Please refer to maintenance instructions remove
and re-install correctly, so vapors can be released
freely.
•
Dirt on the air suction port on the underside of the
base?
Too much dust in the air suction port may block the
air flows into product to fan the mist out of the unit.
Please clean it before using.
Water leakage
•
The upper lid and inner cover are not installed
properly?
Remove and reinstall correctly, so mist can be
released freely.
•
Low temperature or high humidity?
Under these conditions, the mist may condense
quickly into water droplets.
Size
100*100*190 mm
Weight
Approx 530g
Power: input/output
AC100-24OV 50/60Hz DC24V 500mA
Cable length
Approx 170 cm
Electric consumption
Approx 11W
operating mode
Continuous / intermittent
Water capacity
200 ml
LED Light
3pcs
material
ABS/PP/PC
Accessories
Power adapter, User manual
Ultrasonic vibration
2.4 MHz