AromaMist AI-5, Installation And Operation Manual

Page: 13 / 15

Page 13
VII. Operation
During the steambath session, initiate the
AromaMist AromaMist AromaMist AromaMist
pump by pressing the mist icon
below the on/off LED indicator light on the aroma switch. Once activated, the red LED
will light and the aroma oil will begin to flow into the steam line.
Once satisfied with the steam shower aroma, depress the aroma switch once again to
stop the flow of aroma oil. The red on/off LED will indicate the pumps status at all
times. Start and stop the aroma oil flow as required to maintain the desired steam
bathing fragrance.
NOTE: Frequent starting and stopping of aroma oil will not adversely affect the
AromaMist AromaMist AromaMist AromaMist
pump.
The
AromaMist
AromaMist AromaMist
AromaMist
pump has no adjustment for aroma oil flow rate. For increased
fragrance intensity, initiate the aroma switch earlier in the steambathing session.
NOTE: The
AromaMist AromaMist AromaMist AromaMist
pump system has a built-in timer and, if not manually
turned off, will automatically operate for a 10-minute session.
For care of your aroma switch, only use mild soap and water on a soft cloth. Do not use
any abrasive or chemical cleansers.
CAUTION: Aroma oil is an oil-based product which will make the steam shower
floor slippery. It is important to wash down floor with water immediately after
each use and use caution while walking.