9
8
HOW TO BLEND WET
INGREDIENTS
1. Load ingredients into the Container. When pouring in liquids, the liquid level should
at minimum cover the blades. Cover with the Container Lid and secure the Lid Cap.
WARNING: To prevent overflow, do not fill the container above the 6 cup line as the level
may increase during blending and from tamping.
2. Set the Container firmly on the Base.
3. Set the Mode Switch and, if necessary, the Time Switch.
4. Turn the Power Knob clockwise to turn on the blender. For best results, blend on MAX.
5. To add additional ingredients, remove the Lid Cap and add ingredients using the Funnel.
Once the contents are pureed, add water or ice until it reaches the desired volume and/
or thickness.
6. Turn the Power Knob counter-clockwise to turn off the blender, and then set the Mode
Switch to OFF.
7. Remove the Container from the Base, and the Container Lid from the Container. Pour the
contents from the Container, using the included Spatula to scrape out if necessary.
•
When blending hot liquids, start on MIN before moving the speed up to avoid
potential burning or scalding from splashing. Beware of hot steam venting from
the opening of the Container Lid that can cause burns, even with the Lid Cap
in place.
•
When making jam purées, fruits high in water content such as strawberries
do not need any additional water. Add sugar to the ingredients and blend on MAX
until pureed. Pour the contents into a double boiler and allow it to cook for 10 to
15 minutes. Allow to cool before serving.
WARNING
TIP
HOW TO BLEND DRY
INGREDIENTS (GRINDING)
1. Load the ingredients into the Container. For best results, use pre-roasted ingredients.
Cover with the Container Lid and either secure the Lid Cap or insert the Tamper.
2. Set the Container firmly on the Base.
3. Set the Mode Switch and, if necessary, the Time Switch.
4. Turn the Power Knob clockwise to turn on the blender. For best results, start on MIN and
slowly work the power up to MAX.
5. To add additional ingredients, remove the Lid Cap and add ingredients using the Funnel.
6. Turn the Power Knob counter-clockwise to turn off the blender, and then set the Mode
Switch to OFF.
7. Remove the Container from the Base, and the Container Lid from the Container. Pour the
contents from the Container, using the included Spatula to scrape out if necessary.
•
For Powders, roast ingredients in microwave or conventional oven until all moisture
content has been evaporated. Fill the Container up to at least the 1.5 cup line.
Blend on MAX until the ingredients have been ground to powder.
TIP