10
11
A9. Carrying Handle
A10. Wheels
A11. Horizontal Parking socket
A12. Motor protection filter
A13. Air Filter
A14. Air Filter Lid
A15. Cable with Plug
A16. Dustbag
A17. Textile Dustbag
A18. Locking latch for the dustbag
B. HOSE AND TUBE GROUP
This group includes flexible hose with handle, extension
tubes, and other functional units. Accessories can be
fixed directly to the handle without the use of extension
tubes. An air valve is placed on the handle to adjust
the vacuum power.
B1. Flexible Hose
B2. Handle
B3. Air Valve
B4 . Telescopic Extension Tubes
B5 . Hose Connection Part
C. ACCESSORIES GROUP
For different functions, various accessories can be used.
C1. Accessories Holder
C2. Crevice Nozzle
C3. Round Brush
C4. Small Brush
C5. Main Brush with Pedal
III. TECHNICAL SPECIFICATIONS
Voltage
: 230 V, ~ 50Hz.
Power
: 1500W
Elec. Isolation Class : II
Power Cord Length : 6 m.
Energy Class
: C
IV. PREPARATION FOR USE
• Release the top section cover by pulling the dip locks
outwards.
• Place the dust bag and close the top section cover.
• Fix the flexible hose to the suction opening by using the
latches.
• Hold the plug, pull the power cord to the desired length
and plug it to the socket.
• Turn on the appliance by using the On/Off Switch.
• Adjust the vacuum power by turning the air valve on
the handle
• Vacuum power can be adjusted electronically by
using the adjustment button.
• Check the Dust Full Indicator. If the indicator shows
red;
» Dust bag is full. Change the dust bag.
» There might be a blockage inside the brushes,
tubes or hoses; clean inside them.
V. OPERATING THE APPLIANCE
• Choose the most appropriate accessories for the task
you are going to perform and fix those accessories
directly to the handle or to the extension tube.
• For an effective cleaning, following accessories can
be used:
» Main Brush: For carpets, rugs, tiles, parquetry,
marble surfaces
» Crevice Nozzle: For narrow areas such as
radiators,drawers, corners etc.
» Extension Tube without brush: For soil, wood
chippings, hair, fur and etc.
» Round Brush: For removing the dust on shelves,
lamps, shades, clothes, furnitures, electronic
devices and etc. Should be fixed to the crevice
nozzle
» Small Brush: For pillows, matresses,cushions and
couýches
• Plug the appliance to the power socket and turn on
the appliance by pressing the On/Off Switch.
• After the use of the appliance:
» Turn off the appliance and unplug it from the power
socket.
» Press the Power Cord button to rewind the cable.
Warning! Only rewind if the cable is dry. Do not
rewind the cable if it gets wet for your safety.
First dry the cable, and then rewind it!
• Brushes,tubes, crevice nozzle and hose can be placed
to the parking socket when you are not using the
appliance.
• Do not preserve the appliance outdoors or at the
temperatures that are below freezing degrees.
• Replacing the dust bag:
» Turn off the appliance and unplug it from the power
socket.
» Remove the hose from the suction opening by
pressing the buttons
on the sides.
» Open the top section cover by pulling the latch
upwards.
» Remove the dustbag by pressing the latches on the
side.
» Replace the dustbag. The new dustbag can be
obtained from the certified services.
» Close the top section cover.
Warning! If your vacuum cleaner does not have a
dustbag, do not force the upper cover, because the
cover will be not closed.
VI. CLEANING AND MAINTENANCE
• Always unplug the appliance before starting any
cleaning and maintenance operations.
• Always clean the hose, tubes, filters and accessories
after use.
• To ensure perfect hygiene and to extend your vacuum
cleaner’s life, never leave the appliance dirty.
• Clean the appliance’s surface, tubes and accessories
with a moist towel and dry it afterwards.
• Clean the textile filter by shaking before it’s pores
get completely filled. If it gets completely dirty, the
filter can washed with warm, soapy water or running
water.
Warning! Never wash the textile filter at washing
machines nor hot water.
• Keep the accessories on the accessories holder after
use. Check if the cable is damaged after rewinding
the cable.
• Use only original accessories and parts to ensure
effective cleaning, to extend your vacuum cleaner’s
life and to benefit from warranty. The parts and
accesories can be obtained from a certified service.
• To clean the motor filter:
» Turn off the appliance and unplug it from the power
socket.
» Open the top section cover.
» Remove the dust bag.
» Remove the motor filter by pulling it from its socket.
» Wash the filter with water and leave it to dry. Never
put a wet filter!
» Place the filter back to its socket
» Replace damaged filters with new ones. A new
filter can be obtained from a certified service.
» Do not operate the appliance without the motor
filter.
• To clean the output air filter:
» Use the latch on the air filter cover to open the
cover.
» Remove the filter from its socket and shake it. The
filter can also be cleaned by vacuuming.(Figure 10)
» Place the filter back to its socket.
» Replace damaged filters with new ones. A new
filter can be obtained from a certified service.
» Do not operate the appliance without the air filter
