9
- If the insulation function has been not selected, the kettle will be lifted up from the base to enter into
the standby state, so the program will be initialized.
- In case of the insulation function selected, if the kettle is lifted up from the base, this state before
lifting will be kept; if the base can not detect the kettle within one minute, the beep sound will be given
to enter into the standby state and the program will be initialized; if the base can detect it within one
minute, the front lifting will continue on.
- In standby mode, all LEDs are off and the heating process stops.
- In standby mode, if there is no kettle on the base, all buttons and indicators disable.
E. CLEANING and MAINTENANCE
Cleaning:
• Before cleaning, please carefully read the “Warning” section;
• Before cleaning, remove the power plug and allow the kettle cool;
• Wipe the kettle outside and bottom cover with a damp cloth and then dry it with dry cloth. Do not use rough
cleaning materials, otherwise it will scratch the kettle body.
• Clean and remove the debris and attachments with the soap water or cleaning agent rather than strong
acids or other corrosive detergent.
Descaling:
• Descale the kettle regularly to ensure a longer product life;
• At least descale twice each year in normal use;
• Add the vinegar to the MAX level shown in water gauge and boil;
• Cut off the power (remove the power plug);
• Add the cooked vinegar into the kettle for one night and then drain;
• Add the water to the MAX level shown in water gauge to boil and then drain; after that, rinse the remaining
dirt and vinegar off;
• Wash the kettle with cleaning water for descaling.
