OFF
Firefly1
Firefly2
Main3
Firefly3
Main1
Main2
Turbo1
x1
x1
x2
x3
1x18650 Li-Ion
2xCR123A
2
xRCR123 Li-Ion
The flashlight has 4 Sections of modes:
[Section1] – Firefly modes
[Section2] – Main modes
[Section3] – Turbo modes
[Section4] – Special modes
In OFF state:
Click: To turn on the last used mode.
Press and hold: To turn on Firefly1 mode in [Section 1].
In ON state:
Click: To turn off the flashlight.
Press and hold: To start cycling through the modes of the current Section.
The same in OFF & ON states:
2 clicks: To turn on the Main mode [Section 2]. Then double clicks will switch
modes between chosen modes in [Section 1] and [Section 2].
3 clicks: To turn on Turbo mode [Section 3].
4 clicks: To turn on Special mode [Section 4].
Wizard Pro has 2 types of operation:
1.
General.
The flashlight is switched on/off by 1 click.
2.
Tactical.
The flashlight will switch on in the last used mode only for the time
the button is being pressed. This type of operation is useful for short-time
lighting and setting signals.
To access the Tactical operation type, unscrew the tailcap to 1/4, press the
button and tighten the tailcap again keeping the button pressed.
To return to the General type – press the button and keeping it pressed -
unscrew the tailcap to 1/4.
Automemorizing.
After switching off the last used Mode is memorized for
quick 1-click access at next switching on. If the flashlight was turned on in one
of the Special modes it will turn on in the last used Main mode.
Multicolor State Indication
. Shows the battery level by short flashes every 5
seconds
in OFF state
even
. It also can be helpful to find the flashlight in the
dark
.
Switching Multicolor State Indication ON/OFF.
It is switched off by default in
OFF-state and Firefly modes. To turn on and off: unscrew the tailcap to 1/4,
press the button and holding the button pressed - tighten the tailcap and then unscrew it again. The settings will be memorized even
when battery is changed.
Ultra-low current consumption allows color indication to work for more than 25 years.
Lock-out function.
Unscrew the tailcap to 1/4 for the protection from accidental switching on. State Indication will be turned off.
Warning indication s
hows the battery level and the temperature inside the flashlight.
Low battery level. When it is < 25%, the color LED will show the warning level – flashing in orange color once in 2 second. With a further
voltage reducing brightness will start to decrease in steps for safety of the battery and user. If brightness will be <25% , the main LED
will flash 2 times. Critical battery level <10% is red indicated once a second.
High temperature. When it increases to the warning level – the color LED flashes by orange 3 times once in 2 seconds. At critical level
the color LED flashes in red 3 times a second, brightness starts to reduce. After cooling down the brightness increases to usual level.
Operation
Release after it will flash 3 times a second
Click x1, x2 or x3
Main
Press & Hold
Click x2
OFF
в
Main
Main
в
Firefly
Any mode
в
Main
Main1
в
Main2
е з
Main3
Click x2
Press & Hold
Firefly
OFF
в
Firefly
Firefly1
в
Firefly2
е з
Firefly3
Press & Hold
Turbo
OFF
в
Max
Any mode
в
Max
Click x3
Turbo1
гд
Turbo2
Strobe
Press & Hold
OFF
в
Strobe
Any mode
в
Strobe
Click x4
Firefly
гд
Main
Press & Hold
Switching State Indication ON/OFF
Press & Hold
1
2
+
State Indication
Battery level
5sec
< 100%
< 50%
Set description
ь
Depending on the model, your
flashlight
can inconsiderably differ from the pictures in the manual.
ь
The producer reserves the right to change the package at his own discretion without modifying this manual
.
Initial Service
Wizard
To set/replace batteries:
1.
Unscrew the tailcap.
2.
Place the batteries with the positive contact (+) facing the
head of the flashlight.
3.
Adjust the tailcap and tighten it as far as it can go.
The flashlight is ready for operation.
Specifying the battery type for correct voltage indication.
Do not specify the type of power source manually unless you use unprotected Li-Ion batteries. 1x18650 Li-Ion battery is by default.
The removable magnet in the tailcap.
With its help you can easily attach the flashlight to an electric service panel, a bike handlebar
,
above a car wheel
, etc
.
The magnet can be taken out
of
the tailcap. To do this unscrew the small cover at the end of the
tailcap and put the magnet out.
x2
1.
1.
2.
2.
3.
To access the Menu press and hold the switch button (when the flashlight is switched off). It will switch on, go through the all available
modes, then after 2 seconds Turbo1 will access the Menu and will flash about 3 times a second. Release the button.
Now you can specify the battery type: 1 click for 1x18650 Li-Ion, 2 clicks for 2xCR123A, 3 clicks for 2xRCR123 Li-Ion.
To use the
head mount
with the
flashlight:
b.
e.
c.
Pass the ends of
the big
strap through
the loop of the
small
strap and slots in
the silicone holder (fig.
b
), conjoin
them in a ring (fig.
c
). Pass the loose
end of the
big
strap through the loop of
the
small
one in the opposite direction
and fix it in the buckle (fig.
d
).
Connect
the
small
strap
with the
silicone holder.
Fix the
flashlight
and
adjust the
elastic bands
to the size
of your
head.
3.
d.
a.
b.
e.
c.
1
sec
Low Battery Indication
Warning
Critical
< 25%
<
10
%
2
sec
2sec
High Temperature Indication
Warning
Critical
WARM
HOT
1sec
Strobe1
в
Strobe2
е з
Strobe3
Items included in the package:
1 -
Flashlight
6 -
2 spare O-rings
2 -
Clip
7 -
Magnet
3 -
Lanyard
8 -
Silicone holder
4 -
Hand band
9 -
User manual
5 -
Headband (2 straps)
1
2
3
4
5
6
7
8
9
