LS-25(T) WEATHERPROOF SPEAKER
User Manual
page 14/24
armtel.com
© Armtel
ENG
In the event of such factors, find another operating site where said factors do not exist
or do not affect operation of the product.
ATTENTION! NEVER DISMANTLE THE PRODUCT CONNECTED TO MAINS!
2.2 Preparation for use
2.2.1 Preparation of LS-25(T) for use should be carried out by service personnel who
have undergone appropriate training and become familiar with the requirements of this User
Manual.
2.2.2
С
heck the scope of supply of LS-25(T) according to product passport.
2.2.3 Removing LS-25(T) and from the shipping container and customer package.
Inspect LS-25(T) housing visually, no mechanical damages (cracks, dents, etc.) on
the enclosure and the cover. Check the presence of all fasteners and sealing elements.
2.2.4 Prepare for installation of the LS-25(T) at the operating site. During installation,
be guided by the following regulatory documents:
−
Electrical Installation Rules;
−
Rules for the operation of electrical installations;
−
Safety regulations for the operation of electrical installations;
−
User Manual;
−
instructions for the facilities in which the LS-25(T) is applied.
2.2.5 Prepare holes for LS-25(T) fasteners on the wall surface or on a freestanding
. The distance between the centers of the holes is 30 mm.
Recommended installation height for LS-25(
Т
) – at least 2,3 m above floor level (or ground).
Figure 8 – Dimensions of holes for fasteners
