23
Water distribution headers
Water pump is used only for RW configuration
Sizing of watering recirculation pump is oversized for evaporating and continuous cassette washing.
Globe valves adjustment is required in order to avoid any water spillage outside the EvaPack™ frame.
Header for DW sys-
tem without staging
control
Header for RW sys-
tem without staging
control
Header for DW sys-
tem with staging
control
Header for RW sys-
tem with staging
control
Depending on your needs, we can supply different EvaPack™ headers.
NOTES
For DW units the header should be connected to the inlet water system (solenoid valve or ECV2 valve). In
order to comply with VDI 6022 hygienic requirements and guidelines, the header should be installed with a
slope towards the draining valve, in order to insure the complete emptying of the irrigation piping.
For RW units the header should be connected to the pump. The draining is done through the pump itself, and
passes through the header slope which is created by the pump support.
Header examples
Water pump
The pump could be connected to the header with a 3/4” F/M threaded connector.
The pump outlet is 3/4” F (female).
Summary of Contents for EvaPack Series
Page 46: ...46 Notes...
Page 47: ...47 Notes...
